Seasonic has introduced updated 600W cables for video cards for its power supplies, now offering the H++ connector, compatible with the PCIe Gen5/ATX3 standard. This connector, also known as 12V-2×6, replaces the original H+ (12VHWPR).
Seasonic has three versions of this cable specifically for its power supplies, reports Videocardz. They are not intended for use with products from third-party manufacturers.
The 12V-2×6 cable is compatible with various Seasonic ATX 3.0 power supplies, such as Prime TX, Prime PX, Vertex GX/PX/GX, and Focus GX. These cables will not work with ATX2 power supplies, even if they are from Seasonic.
For those using Seasonic ATX 2.0 components, the company offers a 2×8 to 12V-2×6 transition cable. This adapter supports most Seasonic ATX 2.0 power supplies, except for 650W models and those equipped with a single PCIe connector. The adapter is powered by two 8-pin connectors and is rated for up to 600W.
Features of Seasonic 12V-2×6 cables:
- 12V-2×6 connector (from the power supply side) to 12V-2×6 connector (from the graphics card side) or 12V-2×6 connector at a 90-degree angle (from the graphics card side) to 2x
- 8-pin PCIe connectors (from the power supply side)
- Maximum nominal power 600W
- Size 16 AWG (American wire standard)
- HCS (High-Current System) terminals with 94V-0 plastic material for connectors
- Power supply requirements: 650W and above.
Comments (0)
There are no comments for now